CPAP Resmed Air Sense 10 Autoset

CPAP Resmed Air Sense 10 Autoset

medicare

Description for Resmed AirSense 10 Autoset CPAP :

 Heated Humidifier builds on the reliable and advanced features of the S9 line of machines by ResMed adding a built-in HumidAir™ humidifier in a sleek design that is 23% lighter.

The ResMed Air Sense™ 10 AutoSet CPAP Machine Heated Humidifier combines the proven technology of the AutoSet algorithm with the integrated comfort of the Optional ClimateLineAir Heated Tube. This is an auto-titrating CPAP machine that adjusts the pressure on a breath by breath basis to deliver the minimal pressure needed to maintain the airway.

AirSense 10 AutoSet Key Features:

The Air Sense 10 AutoSet has a colored LCD display and easy to read menus. Select the menu item on the screen by turning the easy grip dial. Selecting the My Options menu shows the current settings and lets the user modify settings including:

  • Ramp time – Ease into sleep with a period of lower pressure. Or select AutoRamp™ and the machine senses when sleep begins.
  • Humidity Level – Set humidity between 1 (lowest) & 8 (highest), or turn it off.
  • Mask Fit – Runs a seal integrity check showing green smiling face or red frowning face.
  • Pressure Relief – Eases the pressure when exhaling
  • SmartStart™ – Therapy automatically starts when it senses breathing
  • Mask Type – Set mask type being used: Nasal; Nasal Pillow; Full Face Mask
  • Run Warmup – Preheat the humidifier water before starting therapy
  • Response – Provides a more gentle transition during pressure increases
  • Light Sensor –A light sensor so it knows when it’s right to adjust the backlighting so it doesn’t bother anyone
  • MyAir™ App Allows You to Track Your Therapy on Your Phone
  • AutoSet Response Can Be Set to Standard or Soft

Specifications of Resmed Airsense 10 Autoset CPAP Machine:

Product Name Resmed Air Sense 10 Autoset CPAP Machine
Brand Resmed
Model Airsens 10 Autoset
Environmental Condition  
Operating Temperature +41 °F to +95 °F (+5 °C to +35 °C)
Operating Altitude Sea level to 8,500' (2,591 m); air pressure range 1013 hPa to 738 hPa
Storage and Transport Temperature -4 °F to +140 °F (-20 °C to +60 °C)
Sensors  
Pressure Sensor Internally located at device outlet, analog gauge pressure type, 0 to 40 cm H2O (0 to 40 hPa)
Flow Sensor Internally located at device inlet, digital mass flow type, -70 to +180 L/min
Temperature  
Maximum Heater Place 154 °F (68 °C)
Cut-out 165 °F (74 °C)
Maximum Gas Temperature ≤ 106 °F (≤ 41 °C)
Operating Pressure Range 4 to 20 cm H2O
Supplemental Oxygen 4 L/min
Physical Device and Water Tub  
Dimensions (H x W x D) 4.57" x 10.04" x 5.91" (116 mm x 255 mm x 150 mm) 
Air Outlet 22 mm
Weight (device and standard water tub) 44 oz (1248 g)
Weight (device and cleanable water tub) 44 oz (1248 g)
Housing Construction: Flame retardant engineering thermoplastic
Water Capacity To maximum fill line 380 mL
Standard Water Tub - Material Injection molded plastic, stainless steel and silicone sea
Cleanable Water Tub - Material Injection molded plastic, stainless steel and silicone sea
Air Filter  
Standard Material: Polyester non woven fiber Average arrestance: >75% for ~7 micron dust
Hypoallergenic Material: Acrylic and polypropylene fibers in a polypropylene carrier Efficiency: >98% for ~7-8 micron dust; >80% for ~0.5 micron dust

In The Box:

  • CPAP Device (Humidifier optional) 
  • Water tub
  • Normal Tube  (Optional : Climate Line Air Heated Tube)
  • Power supply unit
  • Filters
  • Travel bag
  • SD card (already inserted)
All rights reserved. Powered by Cyberdunia